What are the maintenance methods for
roller heat press machine is one of the heat transfer printing machinery and equipment, suitable for large banners, banner, non-woven fabrics, clothing fabrics, towels, sheets, mouse pad and other goods for sublimation transfer. Here we share the next maintenance methods of roller heat press machine . Detailed points are as follows:
1. please punctual cleaning roller heat press machine shell, adhere to the roller heat press machine equipment neat. And the room should avoid dust, can not be prone to machine which is easy produce smoke and dust . At least once a week to check the machine situation, if hairy and other debris, please use tweezers or facial tissue to remove debris.
2. often check the roller heat press machine safety valve, bearings, transmission parts to make sure the action sensitive and reliable.
3. each time before operating, roller heat press machine on the activities of the site must be refueling according to the rules.
4. the roller heat press machine on the gas source processor, the need to close the gas every day 2 times; aerosol oil, adjusted to 4-5 drops per minute, and in the refueling to gas.
5. joint head: drops of butter (a week / time, 10-20g), oil (1-2 drops, 3 days / times).
6. in the use of the process, the emergency stop switch, on roller heat press machine should to minimum use to avoid shortening the life of the chain, towline, belt.
7. For the optical axis, the situation in the machine sometimes will occur, you can drop oil twice a week, do not use poor quality of the media, if the media is too bad, it is easy to break the machine.
8.For the end of the wheel of roller heat press machine, in the cleaning of the table glue , we should avoid table adhesive to the end of the wheel, after cleaning, please check whether the bottom wheel sticky plastic, if available, please dry wipe it, otherwise it will Directly affect the quality of the printing.
You may like that:
Phone：+86 13928986900 / +86 15119752340
