Routine maintenance of the machine(二）
16.
Do not arbitrily change set up
17.
The better the computer configuration for the machine, the larger the memory，The probability of printing a pause is smaller
18.
Put the paper must be on the flat, otherwise print the pattern will have deviation
19.
print the pattern have deviation or have exposed white. Please check the grating
20.
The ink station bracket is turned or reversed, check the limit
21.
Print pattern up and down have ghosting check stepping
22.
Print pattern left and right have ghosting check two-way
23.
Print size and the actual size of the screen does not match, check Stepping,Pressure wheel，Received paper and Put paper
24.
Send a data to the machine after the cancellation and then print, you need to delete the task then send, otherwise will not print
25.
Regardless of any software are as far as possible not installed in the C drive, because the C drive is the system disk
26.
one set computer is best to use one set printer
27.
Special heating system and air drying system as far as possible single
28.
The machine placed in place to be flat, otherwise will have deviation when print
29.
Daily common Broken ink phenomenon
(1) When cleaning, check the Ink suction suck printhead whether have suction, Ink suction whether have damaged
(2) the buffer bottle has air, drained
(3) Printhead mirror and whether there are dirt around, whether have enough ink
(4) Observe whether the machine platform has items attached to the nozzle during printing
(5) Whether it is used for a long time, there is broken needle, no timely soak printer head
(6) Whether the nozzle line has ink and whether there is loose place
(7) Indoor temperature can not be less than 20 degrees
(8) cool ink, especially in winter, get back the ink must first put a while, so that the ink and the indoor temperature is almost the same
You may like that: Routine maintenance of the machine
