Welcome to Guangzhou Elephant Digital Technology Co., Ltd.

Sitemap | China

Keywords:

Korea heat transfer vinyl| Cutting plotter| EPSON printhead
86-20-85643576
86-20-89015371

E-mail:dbxsublimation@transferchina.cn
Address:ROOM508-509 Fortune Center, No. 317 Dongxing Road, Dalong Street, Panyu District, Guangzhou City

Position: Home > News Center >

How to achieve the best effect of sublimationCategory

Time:2017-09-04 17:31Source:Guangzhou Elephant Digital Technology Co., Ltd.Read:

How to achieve the best effect of sublimation

 
      In the digital printing processing, clothing fabric printing, fabric transfer is divided into pieces of film transfer and transfer of clothing. In this transfer process, the film transfer and garment transfer method is roughly the same, so in the transfer process, how to make sublimation paper in the transfer process to achieve the best state?

1, batch transfer before you do the transfer sample to determine the impact of the color of the transfer machine temperature and time is appropriate.

2, before the transfer, to ensure that the basic sublimation transfer paper dry, in order to avoid incomplete transfer, stains and other phenomena.

3, before the transfer of sublimation paper patterns and fabric blowing and finishing, remove the fabric and sublimation paper scraps, cilia and other attachments, so that these debris caught in the sublimation printing paper and fabric caused by printing defects.

4, the ghost is often due to the pressure plate too fast separation, the pressure plate air adsorption sublimation paper caused by the time, should adjust the throttle to the plate heat transfer machine cylinder (or cylinder) separate speed slow , To avoid the transfer of sublimation paper was sucked after the fall caused by the second sublimation transfer and ghosting. To avoid ghosting can also be in the sublimation paper dipped in the four corners dipped in water adhesion cloth transfer or use of sublimation paper.
5, due to the floor of the cushion material (cotton, sponge, cardboard, etc.) in the absorption of ink after the accumulation of moisture will lead to excessive water vapor when the transfer, so that the pattern on the transfer cloth color fades, local fog water , So before the transfer and transfer process to always empty a few times, the moisture on the cotton pad on the evaporation of moisture, if the conditions can be replaced in a timely manner to dry the cushion material to avoid this situation.

6, flat transfer process should pay attention to safe operation, is strictly prohibited into the hot plate under the hand, pay attention to avoid high temperature burns.

   You may like that:   
How to use the transfer paper to transfer on the fabric